The SLX
130 and SLX 300 are provided with a suspension method as standard. The
sensor is held at the proper elevation by tie-wraps. The following two
documents describe this mounting method:
The SLX
130 and SLX 300 are provided with a suspension method as standard. The
sensor is held at the proper elevation by tie-wraps. The following two
documents describe this mounting method:
SLX 130 Transducer Installation Instructions
SLX 300 Transducer Installation Instructions
The tie-wraps require periodic inspection.
Contegra offers several options for installations in more turbulent environments.
The CH-SLX1 Cable Hanger may be used on either the SLX 130 or SLX 300 to hold the transducer by its signal cable.
The SLX 130 may be suspended by a pipe which is attached to the 3/4" NPT connector at the top of the SLX 130 housing.
SLX-PBkt Pipe Mounting Bracket
The SLX 130 is offered with Flange Mounting. The sensor must be ordered from the factory with the flange. It is not a field-installable option.