Back
Comment: The following text has been provided for
project engineers. The text can be copied from this page and pasted into your
word processor for inclusion in system specifications.
MODEL GPX 100 Engineering Specifications
A gauge pressure transducer shall be provided to sense the pressure of the ___________________ at the location as shown on the plan drawings and in accordance with the manufacturer's recommendations.
The sensor shall have a brass 1/4" NPT bulkhead fitting for connection to the system’s pressure tap.
E version (0.5-4.5 VDC)
The transmitter shall be a 3 wire, 5 VDC powered type with an output of 0.5-4.5 V directly proportional to the measured level excursion. The transducer shall be UL Listed. The transducer shall be a CONTEGRA Model GPX 100-E.
M version (4-20 mA output)
The transmitter shall be a 4-20 mADC, 2 wire, 10-30 VDC loop powered type with its output signal directly proportional to the measured level excursion. The transducer shall be UL Listed. The transducer shall be a CONTEGRA Model GPX 100-M.